17
Kleiss MCS60-38 System Manual v.15 May 2020
|
www.MainlineControlSystems.com
Take the hot tapping device out of the case and
inspect the device for dirt and debris. Make sure
the threads are clean and the device operates
freely.
Visually inspect the drilling dome and verify
o-rings are in place.
Attach the drilling dome to the hot tapping device.
Tighten the connection by means of the hooked
wrench.
Attach pilot drill to cutter adapter. Secure pilot
drill with allen wrench. Then attach cutter adapter
to cutter.
Figure A:
Steel and cast iron cutter [13200140] and pilot
drill [14300060].
Figure B:
PE and PVC cutter [13100080] and pilot drill
[14300060].
A:
B:
