29
Kleiss MCS60-1016 System Manual v.15 June 2020
|
www.MainlineControlSystems.com
If assistance is needed, use the stopper rod
removal tool to push the black cap up.
With the stopper rod out, follow previous steps to
attach the stopper, pull a vacuum, and spray the
stopper with silicone spray.
Next, push the stopper into the tower until black
cap is flush with the tower.
Flip the bolts to the top of the black cap and
tighten wing nuts.
Lock the stopper rod by tightening the black
thumb screws onto the rod.
Attach gear box air ratchet to flow stopping tower
gear box.
Using the gear box air ratchet, drive the threaded
rods down through the gear box. This allows
the chute attachment component to be visible at
bottom of flow stopping tower.
