MAINE ENERGY SYSTEMS AutoPellet Air TOUCH 17, Installation Manual

Page: 23 / 76

Notes on bringing the unit into the building
23
Approximate Furnace Weight
Furnace size Furnace
Weight of Furnace with fan 509 lb
Minimum clearances suggested for proper cleaning and maintenance
Note:
To install the heating system properly and ensure economical operation, you need to make sure that mini-
mum clearance dimensions indicated below are observed when setting up the Furnace.
In addition, make
sure that all code requirements at the installation location are complied with relating to the minimum
clearances.
a
Minimum clearance to the edge of
removable top cover of the Furna-
ce. For flue pipe clearance, refer to
applicable codes. inch 12
b Min. clearance of side of Furnace inch 12
c
Min. clearance of front of Furnace inch 20
d Min. clearance to housing - burner
side. inch 10
Note:
Place the Furnace according to the minimum clea-
rances to the flue pipe connection point as defined
in NFPA 31, or if NFPA is not recognized, then the
code pertinent to the installation location.
Make sure that you also comply with local legal
regulations.
For clearances required for floor protection, see fol-
lowing page.
*) Distance should be clarified with ventilation fitter. Recommendation Maine Energy Systems: 18 inch.
The furnace must be attached to the floor if installed in
mobile housing.
Installation Manual AutoPellet Air Furnace 17 — 28