MAINE ENERGY SYSTEMS AutoPellet Air TOUCH 17, Installation Manual

Page: 48 / 76

48 Fuses - Furnace controller
9.4 Fuses - Furnace controller
The control unit is protected against short circuits by fuses which are in the control panel (under the front
Furnace panel). There are also fuses in the terminal box at the rear of the Furnace. At the rear panel, there are
4 fuses. Two 6.3 amp for outputs there, and two 10 amp also for the main controller.
D Da am ma ag ge e o off p prro op pe errtty y
Should it become necessary to replace a fuse, it is criti-
cally important to replace the fuse only with a fuse ha-
ving the same exact ratings.
1 F1: Fuse T8A
2 F2: Fuse T10A
9.5 Operating the AutoPellet
The operation of the system is described in the manual for the End User .
PE 603 USA_FA 1.0