Maico MI 24, Operating Instructions Manual

Page: 21 / 53

Operating Instructions MI 24, MI 24h
19
4.6 How to print the test result
After the end of a test you can print the results for your records by pressing the Print
button . The quiet thermal printer prints out the example used in the previous
paragraph in only six seconds.
While the printer is working, no key action is possible and the probe is inactive. figure
15 shows the printout.
Id No: Patient’s Id number.
Date: Actual test date.
Name:
Name of the patient.
Examiner: Name of the examiner.
Remarks: Additional information
about the test or patient.
All other values and the tympano-
gram correspond to those you have
seen on the LCD (explained on the
previous page under 4.5).
The “intelligent” printer control
helps you save paper. It will only
print out what was actually
measured. The printout in the
example above does not show
reflex frequencies because only the
tympanogram was measured.
If you have saved two
tympanograms (for example, both
the left and the right ear) they are
printed side by side.
You can produce as many printouts as you want by pressing the Print button several
times.
4.7 How to delete the test results
By holding down the L/R key the measurement memory will be deleted. On the LCD
the message Delete all Data? appears. Press Enter to delete all patient data. Then
the LCD shows an empty measurement screen.
If you press the Menu button, you return to the measurement screen without
deleting the measurement data.
0.94 ml
0.81 ml
- 37 daPa
32 daPa
ml
3
2
1
0
-600 -300 300 daPa
Right
Ear Volume
Compliance
Pressure
Gradient 0.94 ml
0.81 ml
-37 daPa
31 daPa
Tympanogram
Remarks:
Examiner:
Name:
Id No.: Date:
MAICO
MI 24
Figure 15
Printout of a normal tympanogram
1