Mahlkonig E80S, Instruction Manual

Page: 24 / 44

Interrupting grinding
Grinding stops automatically when you remove the portafilter from the por-
tafilter intake (12) and continues with grinding when you insert the portafilter
back into the portafilter support again and press the start button
(11)
.
1. Remove the portafilter from the portafilter intake during grinding to
interrupt grinding and stop the grinding time. The symbol of the selected
recipe flashes.
2. Reinsert the portafilter between the portafilter intake and the portafilter
support (10) before the abort time elapses.
The suspended grinding process is continued automatically until the
grinding time has elapsed.
• If you do not want to continue with the grinding process,
then press the controller button (3) .
The display jumps directly to the selected mode and the pre-
viously suspended time is deleted.
• The duration of the abort time can be set via the menu.
Rescue button grinding
In the event of a display failure, grinding can be carried out using
the rescue button.
1. Press the rescue button (22) with the help of a thin screwdriver or a
similar tool.
The grinder starts the grinding process.
2. End the grinding process by no longer pressing and holding the rescue
button.
Changing the type of espresso beans
1. Lock the bean hopper
(1)
by pushing in the slider
(18)
.
2. Grind any espresso beans left in the grinding mechanism until the grinder
runs empty.
3. Rotate the bean hopper anticlockwise to release it from the grinder and
lift it upwards to remove it from the grinder.
4. Remove the remaining espresso beans from the bean hopper.
5. Remove any excess beans from the bean hopper intake
(2) (see Fig. B ).
6. Place the bean hopper onto the bean hopper intake.
E80S | EN ESPRESSO GRINDER
24