Mahlkonig E80S, Instruction Manual

Page: 19 / 44

Setting up the portafilter support and spout
You will need a flat-head screwdriver to adjust the portafilter
support (not included in the scope of delivery).
Adjust the portafilter support (10) to the size of your espresso machine’s
portafilter (see Fig. C ):
1. Make sure that the grinder is switched off (On/Off switch (5) to position
“0”).
2. Turn anticlockwise using a flat-head screwdriver to loosen the screws
(8)
for adjusting the portafilter support (left and right).
The portafilter support is lowered as far as it will go.
3. Insert the portafilter into the portafilter support (12) .
4. Push the portafilter support upwards until the portafilter fits exactly
between the portafilter support and the portafilter intake.
If the portafilter support does not fit, contact your supplier (see
chapter “Maintenance and service”).
5. Hold the portafilter support in position and fix it by turning the screws
for adjusting the portafilter support (left and right) clockwise until tight
using a flat-head screwdriver.
6. Push the spout guide
(19)
up or down in the lock to align the spout
(13)
in the optimal position for your portafilter (see
Fig. E
).
Align the spout so that the ground coffee falls from the spout into the
centre of the portafilter.
19
E80S | EN ESPRESSO GRINDER
18