Mahlkonig E80S, Instruction Manual

Page: 18 / 44

Please note that the grinder is subject to an extensive functional
test before delivery and may therefore still contain coffee pow-
der residue.
Setting up the grinder and inserting the bean hopper
You will need a flat-head screwdriver (not supplied) for fixing the
bean hopper.
1. Place the grinder on a level, stable surface that does not shake or wob-
ble.
2. Make sure that the spout (13) is pushed up as far as possible and is se-
curely locked into the spout locking mechanism (see Fig. D ).
3. Make sure that the grinder is switched off (On/Off switch (5) to “0”) and
connect the grinder to the power supply by inserting the power plug into
a properly installed safety socket.
4. Place the collecting tray
(9)
into the corresponding recess in the casing
under the spout.
5. Place the bean hopper (1) onto the bean hopper intake (2) .
When placing the bean hopper on, make sure that you place the nose
of the bean hopper into the corresponding recess in the bean hopper
intake.
6. Push the bean hopper down into the bean hopper intake and turn the
bean hopper clockwise to fix it to the grinder.
If the bean hopper cannot be fixed in place by turning it, it may not be
positioned correctly. In this case, align the bean hopper correctly (see
step 5) and then try again by pressing it down and turning it (see also the
“Troubleshooting” chapter).
The grinder automatically switches off if the bean hopper is not
attached.
E80S | EN ESPRESSO GRINDER
18