Mahlkonig E80S, Instruction Manual

Page: 38 / 44

Fault Cause Remedy
The grinder
does not
grind con-
tinuously or
the grinding
process stops
intermittently.
• The start but-
ton is faulty.
t
Contact your service partner
(see the section “Maintenance and
service”).
The grinder’s
dispensing
accuracy is
decreasing.
• The spout is
clogged.
Too much
ground coffee
has been de-
posited in solid
form inside
the grinder.
t Remove the spout or clean the spout
from the outside with a brush with the
grinder switched off.
Release the lock on the grind adjust-
ment and set the grinding degree to
“10”.
Start the grinding process.
The grinder clears itself.
Then set the grind adjustment to the
setting required during operation.
• The grinder
spout is dam-
aged.
t Contact your service partner
(see the section “Maintenance and
service”).
• The flapper is
dirty .
t Clean the flapper (see “Cleaning the
flapper”).
• The flapper is
faulty.
t
Change the flapper (see “Changing the
flapper”).
The bean
hopper
cannot be
attached.
• There are
beans in the
bean hopper
intake.
t Remove the beans from the bean hop-
per intake.
The grinder
lid cannot be
attached.
• The fix burr
flange is not
installed cor-
rectly.
t
Align the fix burr flange correctly (see
“Cleaning the burrs”).
• The adjust-
ment ring is
not installed
correctly.
t
Align the adjustment ring correctly (see
“Zeroing in the grinding degree”).
E80S | EN ESPRESSO GRINDER
38