background image

© MAHLE 

4  |  ACX2120H  |  Important notes

en

1.

 

Symbols use

1.1

 

In the documentation

1.1.1

 

Warning notices - Structure and meaning

Warning notices warn of dangers to the user or people in the 

vicinity. Warning notices also indicate the consequences of the 

hazard as well as preventive action. Warning notices have the 

following structure:

Warning

symbol

KEYWORD - Nature and source of hazard!

Consequences of hazard in the event of failure 

to observe action and information given.

 

X

Hazard prevention action and information.

The key word indicates the likelihood of occurrence and the 

severity of the hazard in the event of non-observance:

Key word

Probability of
occurrence

Severity of danger
if instructions not
observed

DANGER

Immediate 

impending

 

danger

Possible 

impending

 

danger

Possible

 dangerous 

situation

 

Death

 or 

severe

 injury

WARNING

Death

 or 

severe

 injury

CAUTION

 

Minor

 injury

1.1.2

 

Symbols in this documentation

Symbol

Designation

Explanation

t

Attention

Warns about possible property damage.

t

Information

Practical hints and other useful information.

1.
2.

Multi-step
operation

Instruction consisting of several steps.

X

One-step
operation

Instruction consisting of one step.

Ö

Intermediate
result

An instruction produces a visible intermedi -
ate result.

¨

Final result

Ther

result on completion of 

the instruction.

1.2

 

On the product

 

m

Observe all warning notices on products and ensure they 

remain legible.

 

X

Wear protective goggles.

 

X

Wear protective gloves.

2.

 

Important notes

Before start up, connecting and operating MAHLE 

products it is absolutely essential that the Original 

instructions/owner’s manual and, in particular, the 

safety instructions are studied carefully. By doing 

so you can eliminate any uncertainties in handling MAHLE prod -

ucts and thus associated safety risks upfront; something which 

is in the interests of your own safety and will ultimately help avoid 

damage to the device. When a MAHLE product is handed over 

to another person, not only the Original instructions but also the 

safety instructions and information on its designated use must 

be handed over to the person.

2.1

 

User group

The product may be used by skilled and instructed personnel 

only. Personnel scheduled to be trained, familiarized, instructed 

or to take part in a general training course may only work with 

the product under the supervision of an experienced person.

All work conducted on pressurized equipment may be performed 

by persons with sufficient

 

 knowledge and experience in the 

of refrigeration, cooling systems and coolants and, also be aware 

of the risks involved in the use of pressurized devices.

2.2

 

Agreement

By using the product you agree to the following regulations:

Copyright

Software and data are the property of MAHLE or its suppliers 

and protected against copying by copyright laws, international 

agreements and other national legal regulations. Copying or sell -

ing of data and software or any part thereof is impermissible and 

punishable; in the event of any infringements MAHLE reserves 

the right to proceed with criminal prosecution and to claim for 

damages.

Summary of Contents for ArcticPRO ACX2120H









































Reviews: