Mahindra XUV300 W4 Owner'S Manual Download Page 57

Page: 57 / 308

5-5

in that seat. Push and pull on the seat to ensure that it is

locked.

5..3

3..3

3 PPaasssseennggeerr SSeeaatt H

Heeaadd R

Reessttrraaiinntt

The head restraint comprises the padded portion which contacts

your head and is inserted/locked in receptacles on the top of the

seat back.

Your vehicle seats are equipped with head restraints which are

vertically adjustable. The purpose of these head restraints is to help

limit head motion in the event of rear collision.

Always align top of the head restraint with the top of your head or

as close to it as possible. To lower the head restraint, press the

lock knob and push the head restraint down.

Head restraint are provided for front row and second row.

To raise the head restraint, pull it up without pressing the release

button. To lower the head restraint, press the release button on top

of the seat back and push the head restraint down.

Removed or improperly adjusted head restraints can result in

serious head and neck injuries in case of a collision.

Do not apply excessive force to the head restraint during

adjustment. It may get damaged.

5..4

4 R

Reeaarr SSeeaatt

Second row bench seat is of 60:40 split configuration and also has

a foldable armrest.

SSEEA

ATTSS A

D SSEEA

ATT B

BEELLTTSS

Summary of Contents for XUV300 W4





















































































































































































































































































































Search results

Summary of Contents for XUV300 W4

Reviews:

Related manuals for XUV300 W4

Brands by name

Popular brands

Mahindra XUV300 W4, Owner'S Manual

Search results

Summary of Contents for XUV300 W4

Reviews:

Related manuals for XUV300 W4

Brands by name

Popular brands