Mahindra XUV300 W4 Owner'S Manual Download Page 258

Page: 258 / 308

15-6

Keep dismounted Tyres in a cool, dry place with as little

exposure to light as possible. Protect Tyres from contact with

oil, grease and fuels.

Do not use a Tyre, wheel size or speed rating other than that

specified for your vehicle on the Tyre placard. Combinations of

unapproved Tyres and wheels may change suspension

geometric and performance characteristics, resulting in

changes to steering, handling and braking of your vehicle. This

can cause unpredictable handling, stress to steering and

suspension components. You could lose control of the vehicle

or the Tyre can unexpectedly fail, resulting in an accident and/

or personal injury.

Replacing original Tyres with Tyres of a different size may result

in false speedometer and odometer readings.

5..4

4..6

6 SSnnoow

w CChhaaiinnss

Snow chains cannot be used on these Tyres.

In case of harsh winter driving conditions, it is recommended

using winter Tyres with the same specifications for better

stability, safety and performance.

5..5

5 TTyyrree R

Roottaattiioonn R

Reeccoom

meennddaattiioonnss

TTyyppee 1

1 -- A

Apppplliiccaabbllee ffoorr aallll 5

5 SStteeeell

Tyres on the front and rear axles of vehicles operate at different

loads and perform different steering, handling, and braking

functions. For these reasons, they wear at unequal rates and

develop irregular wear patterns.

Rotation will increase tread life, help to maintain mud, snow, and

wet traction levels, and contribute to a smooth, quiet ride. Follow

the recommended Tyre rotation frequency for your type of driving.

HEEEELLSS A

D TTYYR

REESS

Summary of Contents for XUV300 W4





















































































































































































































































































































Search results

Summary of Contents for XUV300 W4

Reviews:

Related manuals for XUV300 W4

Brands by name

Popular brands

Mahindra XUV300 W4, Owner'S Manual

Search results

Summary of Contents for XUV300 W4

Reviews:

Related manuals for XUV300 W4

Brands by name

Popular brands