7
BA322301-en
locations, outdoors, in moist rooms (e.g. car wash) or outside a temperature
range of 5…40 °C (41…104 °F).
Pos: 20 /Produktfamilien/Alle Geräte/Überschriften/Überschriften 1.1/S/Überschrift 1.1: Sicherheitsvorschriften für den Betrieb @ 6\mod_1174482268953_75.docx @ 76826 @ 2 @ 1
1.7
Safety Instructions for Operation
Pos: 21 /Produktfamilien/Hebetechnik/- Archiv -/00 Hebetechnik Alle/Inhalte/Inhalt: WARNUNG - Sicherheitsvorschriften für den Betrieb HBZ_12pt @ 55\mod_1549267918500_75.docx @ 3115235 @ @ 1
WARNING
•
Observe the detailed operating instructions.
•
Observe all accident prevention regulations.
•
Use personal protective equipment.
•
The standard lift version shall not be operated in hazardous locations, outdoors,
in moist rooms (e.g. car wash) or outside a temperature range of 5…40 °C
(41…104 °F).
•
To ensure safe operation, check the functionality of all safety devices before
using the lift.
•
The control desk (if present) must be positioned in such a way that there is an
unobstructed view to the complete working area and the emergency stop can
be accessed at all times.
•
All structural parts of the equipment must be visually checked at regular inter-
vals.
•
Supply of suitable illuminating devices is the owner's/operator's responsibility.
•
Do not allow anyone to stay in the danger zone when driving on or off the lift.
•
Lifts with cylinder and runways: when lifting vehicles with a short wheelbase,
make sure that one axle is in front of the lifting cylinder, the other behind it.
•
Lifts with wheel-free jack: before driving on or off the lift or wheel-free jack,
make sure the jack is in bottom position.
•
If the operator is unable to see all parts of the danger zone, a trained second
person must monitor such areas.
•
Center the vehicle on the lift when it is in fully lowered position.
•
After positioning the vehicle on the lift secure it against roll-off.
•
Lifts with runways: make sure the vehicle tyres do not contact the roll-off pro-
tection when raising or lowering the lift.
•
Lifts with runways: modifications (such as usage of extensions) are permissible
only under the condition that the functionality of the roll-off protection is main-
tained (protective position of ≥ 0.1 m above the runways).
•
The load rating on the identification plate must not be exceeded.
•
Keep the path of movement free of obstructions.
•
Only use the vehicle manufacturer's recommended lift points.
•
Only use lifting supports approved by the vehicle manufacturer.
•
The vehicle must be lifted as a whole. usage of external hoisting and support
