6
BA022901-en
Pos: 13 / Technische Dokumentation/Bremsprüftechnik/MBT-SERIE S/022901 M obile Prüftechnik/022901_ 002 M TL 15 | Mob iler Prüfcontainer/BA/Inhalt: 0229 M TL 15 k omplett @ 53\mod_ 1523944918725_ 75.docx @ 3028798 @ 12222222222211221 @ 1
2
Description
2.1
General
The test container is designed for 1-man operation and is set up in a ready-to-use
state in 15 minutes. It is used to check trucks, cars and vans with an axle load of
up to max. 15 t. Depending on the equipment, different vehicle functions, such as
exhaust values, braking, engine power, wheel geometry, etc., can be tested.
Please refer to the operating instructions for the respective tester to find out how
to carry out a test.
DANGER
Operation of the mobile test container during a storm is prohibited due to the risk
of lightning striking!
NOTICE
The roof must be cleared before start-up in the event of snow load!
Climatic conditions
Ambient temperature
-10°C to +45°C
Humidity
100%
Max. wind speed
6 on the Beaufort scale
Max. snow load on the lifting roof
60 kg/m
2
(see safety note above)
Use during a storm
Impermissible (see safety note above)
Installation site requirements
•
Substrate
Solid, load-bearing substrate such as concrete or pavement; asphalt suitable un-
der certain conditions (depending on the temperature)
•
Contact with the ground, torsion
The test container must be installed so that it is torsion-free. The frame and the
ramps must be completely on the ground. Compensate for a lack of support with
support plates.
