18
BA022901-en
14 Raise the ramps with the pull lever,
remove all the rollers and store
them in a safe place.
CAUTION
In the joint area, the ramps must be firmly on the ground, otherwise driving onto
the ramp is not permitted.
14 Extend all spindle supports (three
per side) as far as the ground.
Tool(s) required:
Long extension
1/2” ratchet
15 Raise the lifting roof fully with the <RAISE LIFTING
ROOF> button (green).
16 Deposit the cable remote control in the container.
CAUTION
The following settings must be checked on the remote control:
•
Emergency off switch unlocked
•
<LEFT / RIGHT RAMPS> ROTARY SWITCH (black) in the neutral position
Leave the remote control plugged in!
