19
BA022901-en
17 Switch off the main switch in the
power unit compartment.
18 Unscrew the side slip tester’s
transport lock screw and store it in
a safe place.
19 Set up and connect the testers as required (also see the “Description >
Operating Panel Connection Diagram” section).
a. MLT 1000 headlight tester:
Autonomous, does not need any connection.
b. MLT 3000 headlight tester:
Can be connected to an MLT 3000 PC Bluetooth module. Bluetooth USB
receiver connection at USB 1. Cable connection is not taken into account.
c. 3M SE-402 noise level meter:
Connected at the control panel.
d. MET 6; MDO2-LON; MGT 5 emission testers:
Can be connected using a USB WLAN adapter or using an Ethernet interface
with a cable connection (equipment cart).
e. Simultaneous displays:
Connected using the bottom Harting connector.
