MAGUIRE Weigh Scale Blender 4088, Installation Operation & Maintenance

Page: 51 / 149

51
Operator Access
When enabled, Operator Access will limit access to functions of the blender by prompting for the operator
password. All other functions of the blender will be restricted. Default Operator Access password is:
11111. Also see Changing Passwords below.
Press
Display will prompt for a password.
(admin default: 22222)
Then press:
Press
System Configuration
Display will show the System Configuration categories.
Press
Preferences
Display will show System Preferences categories.
Press
Operator Access
Display will show the Operator Access screen.
Options: Component settings, Weigh Bin options, Mix Motor
options, Batch Mode, FAST operation, Viewing Totals, All
options on the right sidebar, Manual Operation, Calibration,
Timed Operation and Recipe options including creating,
deleting, editing and downloading recipes.
Press
To save the changes or press the
red X to cancel and exit.
Manual Operations
Manual Operations provides manual operation of the valves, augers, weigh bin and mix motor/blades for
manual cleanout and testing procedures.
Press
Display will prompt for a password.
(admin default: 22222)
Then press:
Press
Blender Configuration
Display will show the Blender Configuration screen.
Press
Manual Operations
Display will show the Manual Operations screen.
The device is ON/Open when the button is green. The
device is OFF/Closed when the button is red. When a
device is disabled, the button is blue. Press the device
button to turn ON, press again to turn OFF.
Press
To exit the Manual Operations screen. Devices
that we left ON will be turned off when the
screen is exited.