MAGUIRE Weigh Scale Blender 4088, Installation Operation & Maintenance

Page: 147 / 149

147
Decommissioning and Disposal
Decommissioning the unit: Disconnect the unit from the power supply. Disconnect the compressed
air supply. Cut all Electrical cables & Pneumatic Hoses to decommission the equipment. Disposal:
Remove air hoses and inspection glasses and dispose of with plastic refuse. Remove electric
motor dispose of with metal. Remainder of unit dispose of with metal. Controller: Remove battery
and dispose of battery with hazardous waste. Remainder of controller dispose of with electronic
waste. Re-cycle any hazardous materials/substances in accordance with the Local & National
regulations of the End User e.g. Lithium batteries etc, specific attention should be paid to the
European RoHS & WEEE Directives; remove any ‘sharps’ and dispose of in accordance with Local
& National regulations.
Disclaimers
Intended Use - The intended use of the Maguire Weigh Scale Blenders is specifically for blending of
raw and recycled plastics materials and plastics additives. The Maguire blenders should not be
used for applications outside of the intended use.
Production of Faulty Product - Processing conditions and materials vary widely from customer to
customer and from product to product. It is IMPOSSIBLE for us to anticipate ALL processing
conditions and requirements, or to be certain that our equipment will perform properly in all
instances. You, the customer, must observe and verify the performance level of our equipment in
your plant as part of your overall manufacturing process.
You must verify to your own satisfaction that this level of performance meets your requirements.
We CAN NOT be responsible for losses due to product that is blended incorrectly, even when due
to equipment malfunction or design incorrect for your requirements; and/or for any consequential
losses due to our equipment not blending to your requirements.
We will only be responsible to correct, repair, replace, or accept return for full refund if our
equipment fails to perform as designed, or we have inadvertently misrepresented our equipment for
your application.
Accuracy of this Manual
We make every effort to keep this manual as correct and current as possible. However, technology
and product changes may occur more rapidly than the reprinting of this manual. Generally,
modifications made to the blender design or to the operation of the software are may not reflected in
the manual for several months. The date of this manual will indicate approximately how current this
manual is. Likewise, your blender may have been produced at an earlier time and the information in
this manual may not accurately describe your blender since this manual is written for the current line
of blenders in production (as of the date on the cover). We always reserve the right to make these
changes without notice, and we do not guarantee the manual to be entirely accurate. If you question
any information in this manual, or find errors, please let us know so that we may make the required
corrections or provide you with accurate information. Additionally, we will gladly provide you with an
updated copy of any manuals you need at any time. We welcome comments and suggestions on
ways we can improve this manual. For additional information, or to download the latest copy of this
manual or any other Maguire manual, please visit our website or contact us directly.