49
Magtrol Model 6530 Three-Phase Power Analyzer
Chapter 5 – Computer Controlled Operation
OPERA
TION
Magtrol 7500 Series Power Analyzer
Command Code
function
explanation
MEAS:AMPS
<phase>,<type>
Returns amp measurement
value at current instant.
<phase> indicates input phase.
Valid values for <phase> are:
0
Sum of amp phases
1
phase 1
2
phase 2
3
phase 3
<type> indicates the type of measurement.
Valid values for <type> are:
0 RMS / DC (dependent on mode)
1
peak (instantaneous)
2
crest factor
3
peak hold / inrush
MEAS:CONF
Returns the measurements
the CONF:MEAS currently
has configured to return.
MEAS:DISPLAY
Retrieves displayed values
of current, voltage and
power format as the OE
command in average
mode.
MEAS:FREQ
Returns the current output
frequency.
MEAS:PHASE
<phase>
Returns the amps, volts
and watts measurements
of the requested phase.
<phase> indicates the the desired phase
measurements
Valid values for <phase> are
0
sum of phases (wiring dependent)
1
phase 1
2
phase 2
3
phase 3
MEAS:VOLTS
<phase>,<type>
Returns voltage
measurement value at the
current instant.
<phase> indicates input phase.
Valid values for <phase> are:
0
average of voltage phases
1
phase 1
2
phase 2
3
phase 3
<type> indicates the type of measurement.
Valid values for <type> are:
0
RMS / DC (dependent on mode)
1
peak (instantaneous)
2
crest factor
3
peak hold / inrush
