31
Magtrol Model 6530 Three-Phase Power Analyzer
Chapter 3 – Installation/Configuration
SETUP
Magtrol 7500 Series Power Analyzer
a.2. A source now needs to be selected. Press ShIFT button and release, then press SOURCE
button. keep repeating until desired source selection is reached. Selections include V1,
A1, V2, A2, V3 and A3.
b. For continuous mode, press CYC-CONT until display does not show any readings in
the lower right corner.
3.3.7
s
peciaL
F
unctions
3.3.7.1
Hold
• Freezes display values.
• To set, press and release HOLD button. The display will appear as follows, indicating that
the hold function is enabled.
CURRENT
VOLTAGE
POWER/PF
HOLD MODE INDICATORS
Figure 3–26 Hold Mode
• To disable, press and release HOLD button.
3.3.7.2
Average
• Mode in which the power analyzer displays the running average of amps, volts and watts.
• Used to stabilize mildly fluctuating readings or to determine watt-hours when used in
conjunction with a timer.
• To set, press SHIFT button and release, then press AVG. The display will appear as follows,
indicating that the Average Function is enabled.
CURRENT
VOLTAGE
POWER/PF
AVERAGE MODE INDICATORS
Figure 3–27 Average Mode
• To disable, press SHIFT button and release, then press AVG.
