Magtek MagneSafe V5, Reference Manual

Page: 56 / 138

MagneSafe V5
48
Example Set
Pre Track String property Response (Hex):
Result Code Data Len Data
00 00
Example Get
Pre Track String property Request (Hex):
Cmd Num Data Len Prp ID
00 01 20
Example Get
Pre Track String property Response (Hex):
Result Code Data Len Prp Value
00 03 31 32 33
Post Track String Property (KB, BulleT, UART, RS-232)
Property ID: 0x21
Property Type: String
Length: 0-7 bytes
Get Property: Yes
Set Property: Yes
Default Value: No string with a length of zero
Description: This string is sent after the data for each track. The string can be 0 – 7 bytes
long. If the value is 0 no character is sent.
This property is stored in non-volatile memory, so it will persist when the unit
is power cycled. When this property is changed, the unit must be reset (see
Command Number 2) or power cycled to have these changes take effect.
Example Set
Post Track String property Request (Hex):
Cmd Num Data Len Prp ID Prp Value
01 04 21 31 32 33
Example Set
Post Track String property Response (Hex):
Result Code Data Len Data
00 00
Example Get
Post Track String property Request (Hex):
Cmd Num Data Len Prp ID
00 01 21
Example Get
Post Track String property Response (Hex):
Result Code Data Len Prp Value
00 03 31 32 33