Magtek MagneSafe V5, Reference Manual

Page: 53 / 138

Section 2. Communications
45
This property is stored in non-volatile memory, so it will persist when the unit
is power cycled. When this property is changed, the unit must be reset (see
Command Number 2) or power cycled for these changes to take effect.
Example Set property Request (Hex):
Cmd Num Data Len Prp ID Prp Value
01 02 1B 01 (enable JIS Type 2
decode type)
Example Set property Response (Hex):
Result Code Data Len Data
00 00
Example Get property Request (Hex):
Cmd Num Data Len Prp ID
00 01 1B
Example Get property Response (Hex):
Result Code Data Len Prp Value
00 01 01
SS JIS Type 2 Property
Property ID: 0x1C
Property Type: Byte
Length: 1 byte
Get Property: Yes
Set Property: Yes
Default Value: 0x7F ‘DEL’
Description: This character is sent as the start sentinel for cards that are encoded in the JIS
type 2 format. If the value is in the range 0 – 127 then the equivalent ASCII
character will be sent.
This property is stored in non-volatile memory, so it will persist when the unit
is power cycled. When this property is changed, the unit must be reset (see
Command Number 2) or power cycled for these changes to take effect.