3 - Command Set
DynaPro Mini| PIN Encryption Device | Programmer’s Manual (Commands)
Page 58 of 128 (
D99875629-43
)
3.4.28
Command 0x32 - Get BIN Whitelist Table - Non Financial Format
This command will cause the device to send the current contents of the BIN whitelist for non-financial
cards to the host in the following format:
Table 3-44 - Usage Table for Command 0x32 (Get mode)
Bit
7
6
5
4
3
2
1
0
Byte 0
0x32
Byte 1
Number of bytes to follow (36 for the 6 slots)
Byte 2..7
Data on BIN Table Slot 1
Byte 8..13
Data on BIN Table Slot 2
Byte 14..19
Data on BIN Table Slot 3
Byte 20..25
Data on BIN Table Slot 4
Byte 26..31
Data on BIN Table Slot 5
Byte 32..37
Data on BIN Table Slot 6
If an error occurs, the device will terminate the command and report the error in ACKSTS of
. For a full list of error codes, see
Appendix C Status and Message Table, Table
3.4.29
Command 0x58 - Request Device Certificate
This command directs the device to send the device certificate to the host.
If an error occurs, the device will terminate the command and report the error in ACKSTS of
. For a full list of error codes, see
Appendix C Status and Message Table, Table
If no error occurs, the device will send
Report 0x29 - Send Big Block Data to Host
Table 3-45 - Usage Table for Command 0x58 (For Device Cert)
Bit
7
6
5
4
3
2
1
0
Byte 0
0x58
Byte 1
0x02
Byte 2
0x01
Byte 3..6
0x00
3.4.30
Command 0xFF - Device Reset
This command directs the device to perform a restart.
Table 3-46 - Usage Table for Command 0xFF
Bit
7
6
5
4
3
2
1
0
Byte 0
0xFF
