4 - Installation
DynaFlex II| Product Family | Installation and Operation Manual
Page 24 of 78 (D998200554-10)
Figure 4-4 – DynaFlex II Kiosk Models Overall Dimensions
The screw hole placement on the bottom of DynaFlex II Kiosk models is detailed in
. The
holes are designed to accommodate screw size
M4 x 0.7mm
and a maximum screw depth of 0.315 inches
(8mm). The recommended torque range for installing the screws is 20 to 22 in-lbs. (2.3 to 2.5 N-m).
Figure 4-5 – DynaFlex II Kiosk Models Mounting Hole Locations
When designing the enclosure or mounting bracket, make sure there is adequate clearance for cardholders
to swipe, insert, and tap. If the solution design includes metal objects anywhere near the device, including
metal enclosures, ensure that at all points the metal is no further forward than 15mm below the top face of
the device. Proximity to metal can adversely affect the device’s performance.
As a security measure, the device must be installed such that cardholders have a full, unobstructed view
of the housing around the card insertion slot opening (“entry zone”) and MSR swipe path prior to
insertion or swipe. This is to allow cardholders to easily detect suspicious objects in or around the swipe
