6 - Operation
DynaFlex II| Product Family | Installation and Operation Manual
Page 41 of 78 (D998200554-10)
6.6.2
How to Check Battery Level
When powered on, DynaFlex II starts in the idle / waiting state and shows a
Welcome
page on the
touchscreen. See
6.6.4 How to Power On / Wake Up from Standby Mode / Power Off.
This page
indicates battery level and charge status on the top right corner of the screen.
See
Figure 6-7 Welcome Screen
The table of symbols below describes the various power level and charge status icons. See
Battery Power Level and Charge Status Icons.
Table 6-5 - Battery Power Level and Charge Status Icons
Battery Power Level and Charge Status Icons
Battery is fully charged.
Battery is OK, between 20% and 95% charged.
Battery is low, between 10% and 20% charged.
Battery is critically low, between 3% and 10% charged.
Battery is empty, below 3% charged.
Battery is charging.
