background image

DynaFlex II| Product Family | Installation and Operation Manual

 

Page 2 of 78 (D998200554-10)

 

Copyright © 2006 - 2023 MagTek, Inc. 
Printed in the United States of America 

 
INFORMATION IN THIS PUBLICATION IS SUBJECT TO CHANGE WITHOUT NOTICE. 
MAGTEK CANNOT BE HELD LIABLE FOR ANY USE OF THE CONTENTS OF THIS 
DOCUMENT. ANY CHANGES OR IMPROVEMENTS MADE TO THIS PRODUCT WILL BE 
INCLUDED IN THE NEXT PUBLICATION RELEASE. IF YOU HAVE QUESTIONS ABOUT 
SPECIFIC FEATURES AND FUNCTIONS OR WHEN THEY WILL BECOME AVAILABLE, 
PLEASE CONTACT YOUR MAGTEK REPRESENTATIVE. 
 
MagTek®, MagnePrint®, and MagneSafe® are registered trademarks of MagTek, Inc. 
Magensa

 is a trademark of MagTek, Inc. 

 
AAMVA

 is a trademark of AAMVA. 

American Express® and EXPRESSPAY FROM AMERICAN EXPRESS® are registered trademarks of 
American Express Marketing & Development Corp. 
D-PAYMENT APPLICATION SPECIFICATION® is a registered trademark of Discover Financial 
Services CORPORATION 
MasterCard® is a registered trademark and PayPass

 and Tap & Go

 are trademarks of MasterCard 

International Incorporated. 
Visa® and Visa payWave® are registered trademarks of Visa International Service Association. 
 
ANSI®, the ANSI logo, and numerous other identifiers containing "ANSI" are registered trademarks, 
service marks, and accreditation marks of the American National Standards Institute (ANSI). 
ISO® is a registered trademark of the International Organization for Standardization. 
UL

 and the UL logo are trademarks of UL LLC. 

PCI Security Standards Council® is a registered trademark of the PCI Security Standards Council, LLC. 
EMV® is a registered trademark in the U.S. and other countries and an unregistered trademark elsewhere.  
The EMV trademark is owned by EMVCo, LLC.  The Contactless Indicator mark, consisting of four 
graduating arcs, is a trademark owned by and used with permission of EMVCo, LLC. 
The 

Bluetooth

® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any 

use of such marks by MagTek is under license. 
 
Google Play

 store, Google Wallet

 payment service, and Android

 platform are trademarks of 

Google LLC. 
Apple Pay®, iPhone®, iPod®, Mac®, and OS X® are registered trademarks of Apple Inc., registered in 
the U.S. and other countries.  iPad

 is a trademark of Apple. Inc.  App Store

SM

 is a service mark of 

Apple Inc., registered in the U.S. and other countries.  IOS is a trademark or registered trademark of 
Cisco in the U.S. and other countries and is used by Apple Inc. under license. 
Microsoft®, Windows®, and .NET® are registered trademarks of Microsoft Corporation. 
 
All other system names and product names are the property of their respective owners. 
 
 
 

 

 

 

Summary of Contents for DynaFlex II Series















































































Reviews: