6 - Operation
DynaFlex II| Product Family | Installation and Operation Manual
Page 35 of 78 (D998200554-10)
Status Icon
Meaning
Battery is empty, below 3% charged.
Battery is charging.
Figure 6-2 - Welcome Page Examples
The device may show text other than “Welcome” when it is Active / idle under certain conditions:
•
OFFLINE / Tampered
indicates the device has detected an attempt to tamper with it (for example,
physical tampering, out-of-spec temperature range, electrical attack). If this occurs, remove the device
from service and set it aside in a secure location for possible forensic analysis, and contact the
manufacturer or your reseller for support. This mode can only be reset in the manufacturing facility.
•
OFFLINE / Tamper not active
indicates the device’s tamper detection system is not activated. The
device is not configured properly. If this occurs, remove the device from service and contact the
manufacturer or your reseller for support.
•
OFFLINE / Security not activated
indicates the device’s data security features have not been
activated. The device is not configured properly. If this occurs, remove the device from service and
contact the manufacturer or your reseller for support.
•
OFFLINE / Security activated
indicates the device is ready to have keys injected. If this occurs,
remove the device from service and contact the manufacturer or your reseller for support.
•
OFFLINE / HW missing
indicates the device cannot detect one or more of its installed modules.
This may indicate a mechanical or electrical failure. If this occurs, remove the device from service
and contact the manufacturer or your reseller for support.
