D-1
D
D. Calibration
Introduction
This appendix explains how to access the CALIBRATION menu options for the MM-410
Waveform/Vector Rasterizing Monitor (MM-410) and the AVM-510A Series Automated Video
Monitors (AVM-510A).
CAUTION:
Calibration should only be performed by
qualified field service personnel.
NOTE:
Calibration numbers specific to the MM-410/AVM-510A can be found on an
insert supplied with this manual.
To access the CALIBRATION menu options:
1.
Turn the MM-410/AVM-510A on.
2.
When the Magni MM-410/AVM-510A screen appears, press the
Blue
(2nd) button twice.
3.
After the MM-410/AVM-510A completely boots, press the
Blue
button twice to display the
CALIBRATION menu options.
Summary of Contents for AVM-510A Series
