Magni AVM-510A Series, Operator'S Manual

Page: 56 / 182

Operating the MM-410/AVM-510A
6-8
Mesmnt Menu
The Mesmnt menu contains the measurement portion of the MM-410/AVM-510A (see Figure 6-2 and
Figure 6-3). The Mesmnt menu lets you view the A and B input (digital) measurement options. The
following sections describe each of the Mesmnt menu options.
Measurement
(Composite NTSC, one each for Input A and Input B)
SELECT SET
510A-004
SYSTEM VIDEO
MEASURE LINE, 1/3:10 to 2/4:262
SIGNAL ID, AUTO SIG ID/LIVE VIDEO/75% COLOR BARS/
100% COLOR BARS/75% SMPTE BARS/FCC MULTIBURST/
FCC COMPOSITE/NTC7 COMPOSITE/MULTIBURST
SYS VIDEO LIMITS
SYNC AMPL
BURST AMPL
PEAK VIDEO
PEAK LUMA
APL
NOISE
H BLANKING
H REF TIMING
BURST REF PHA
SC/H PHASE
H BLANKING LEVEL
COLOR SETUP
MEASURE LINE, 1/3:10 to 2/4:262
SIGNAL ID, AUTO SIG ID/LIVE VIDEO/75% COLOR BARS/
100% COLOR BARS/75% SMPTE BARS/FCC MULTIBURST/
FCC COMPOSITE/NTC7 COMPOSITE/MULTIBURST
COLOR LIMITS
WHITE BAR AMPL
SYNC AMPL
BURST AMPL,
SETUP
RED AMPL
RED PHASE
YELLOW AMPL
YELLOW PHASE
GREEN AMPL
GREEN PHASE
BLUE AMPL
BLUE PHASE
FREQUENCY RESP
MEASURE LINE, 1/3:10 to 2/4:262
SIGNAL ID, AUTO SIG ID/LIVE VIDEO/75% COLOR BARS/
100% COLOR BARS/75% SMPTE BARS/FCC MULTIBURST/
FCC COMPOSITE/NTC7 COMPOSITE/MULTIBURST
FREQ RESP LIMITS
SYNC AMPL
BURST AMPL
BAR AMPL
PEDESTAL AMPL
0.5 MHz REF
1.25 MHz
2.0 MHz
3.0 MHz
3.58 MHz
4.1 MHz
MULTIBURST TIMINGS
BAR
PEDESTAL
Packet 1
Packet 2
Packet 3
Packet 4
Packet 5
Packet 6
PACKET FREQUENCIES
Packet 1 to 6
NON LINEAR
MEASURE LINE, 1/3:10 to 2/4:262
SIGNAL ID, AUTO SIG ID/LIVE VIDEO/75% COLOR BARS/
100% COLOR BARS/75% SMPTE BARS/FCC MULTIBURST/
FCC COMPOSITE/NTC7 COMPOSITE/MULTIBURST
NON LINEAR LIMITS
BAR AMPL
SYNC AMPL
BURST AMPL
PEAK LUMA
NOISE
CHR/LUM GAIN
CHR/LUM DELAY
CHROMA REF
DIFF PHASE
DIFF GAIN
P/B RATIO
K-2T FACTOR
AUTOMEASURE
MEASURE LINE, 1/3:10 to 2/4:262
NOISE LINE, 10 to 35
TIME
READOUT
TIME, ON/OFF
TIME SOURCE, AUTO SWITCH/
VITC TIMECODE/INTERNAL CLOCK
VITC LINE, 9 to 25
WAVEFORM
READOUTS
SC/H PHASE, ON/OFF
COLOR FRAME, ON/OFF
START/STOP TIME SETUP
START/STOP FUNCTION, ON/OFF
START REPORT TIME
HOURS, 0 to 23
MINUTES, 0 to 59
STOP REPORT TIME
HOURS, 0 to 23
MINUTES, 0 to 59
SCHEDULED REPORT INTERVAL,
0 OFF to 480 Minutes
ERROR REPORTING, ON/OFF
REPORT SUSTAINED ERRORS,
0 OFF to 60 Minutes
REPORT ALL ERRORS CLEAR, ON/OFF
REPORTING DELAY, ON/OFF
REPORT
AUDIO
OPTIONS
AUDIO METER, ON/OFF
REF LEVEL dB, -20 to 10
AUDIO REPORT
REPORTING, ON/OFF
HIGH AUDIO LIMIT
HIGH REPORT LIMIT, -20 to 10 dB
HIGH ALARM DELAY, 0 to 30 seconds
LOW AUDIO LIMIT
LOW REPORT LIMIT, -40 to -20 dB
LOW ALARM DELAY, 0 to 30 seconds
MULTIBURST ID, AUTO DETECT/
STANDARD/CUSTOM
RESPONSE TIME
(bar graph)
Note: Refer to "Parameters: Range, Accuracy, and Limits," in Chapter 10, for associated nominal values
Figure 6-2. A and B Measurements (Composite NTSC)