Magni AVM-510A Series, Operator'S Manual

Page: 60 / 182

Operating the MM-410/AVM-510A
6-12
COLOR SETUP
Lets you select the MEASURE LINE, SIGNAL ID, or COLOR LIMITS options (COLOUR LIMITS
for PAL).
MEASUREMENT LINE
Lets you select a line (1/3:10 to 2/4:262) that measurements can be taken from (1/3:7 to 2/4:612 for
PAL).
SIGNAL ID (NTSC)
Lets you select LIVE VIDEO, 75% COLOR BARS, 100% COLOR BARS, 75% SMPTE BARS,
FCC MULTIBURST, FCC COMPOSITE, NTC7 COMPOSITE, MULTIBURST or AUTO SIG ID.
When AUTO SIG ID is selected, the AVM-510A automatically detects from the selected line what
type of test signal is present. The line number and type of test signal present appears in the upper-right
corner of the AUTOMEASURE display screen.
SIGNAL ID (PAL)
Lets you select AUTO SIG ID, LIVE VIDEO, 75% COLOUR BARS, 100% COLOUR BARS,
MULTIBURST, CCIR 17/330, NATIONAL ITS, or CCIR18. When AUTO SIG ID is selected, the
AVM-510A automatically detects from the selected line what type of test signal is present. The line
number and type of test signal present appears in the upper-right corner of the AUTO MEAS SET
display screen.
COLOR/COLOUR LIMITS
Lets you select and set color/colour limits. See Figure 6-2 and Figure 6-3 for a list of color limit
options. Refer to “Parameters: Range, Accuracy, and Limits,” in Chapter 10, for their associated
nominal values.
FREQUENCY RESP
Lets you select the MEASURE LINE, SIGNAL ID, FREQ RESP LIMITS, MULTIBURST
TIMINGS, or PACKET FEQUENCIES options.
MEASUREMENT LINE
Lets you select a line (1/3:10 to 2/4:262) that measurements can be taken from (1/3:7 to 2/4:612 for
PAL).
SIGNAL ID (NTSC)
Lets you select LIVE VIDEO, 75% COLOR BARS, 100% COLOR BARS, 75% SMPTE BARS,
FCC MULTIBURST, FCC COMPOSITE, NTC7 COMPOSITE, MULTIBURST or AUTO SIG ID.
When AUTO SIG ID is selected, the AVM-510A automatically detects from the selected line what
type of test signal is present. The line number and type of test signal present appears in the upper-right
corner of the AUTOMEASURE display screen.