32
58-610 Model R82 Radar Transmitter
2.6.6.3 Radar Transmitter User Menu—Flow and Level
Note: Press UP arrow 5 times to reach screen where menu language can be chosen.
Display
Action
Comment
1
*Status*
*Level*
*Flow*
*Head*
*Distance*
*Echo Str xx*
*%Output*
*Loop Current*
*Local Tag*
*Totalizer R*
*Totalizer NR*
Transmitter Display
Transmitter default display: Status, Level, Flow, Head, Distance,
Echo Strength, % Output, Loop Current, Local Tag, and Totalizer
values advance every 2 seconds. All screens (except 2-11)
default to this screen after 5 minutes of no keystrokes or if a
Fault or Warning message is displayed.
Default display will also show the highest priority Fault or
Warning. If more than one Fault or Warning exists they will be
displayed in the History screen (Item #2, Section 2.6.6.4
Radar
Transmtter Factory Menu
on Page 40) in chronological order.
To Add/Remove what information is shown in default display:
• Go to specific parameter in question (screens 2-11)
• Press Enter
• Choose On or Off
• Press Enter to confirm
2
Level
xxx.x units
Transmitter Display
Transmitter displays Level measurement in chosen unit of
measure.
3
Flow
xxx.x units
Transmitter Display
Transmitter displays Flow measurement in chosen unit of
measure.
4
Head
xxx.x units
Transmitter Display
Head is defined as the measurement between Zero flow and
Maximum flow. It is shown in user-selected Level Units.
5
Distance
xxx.x units
Transmitter Display
Transmitter displays Distance measurement in chosen unit of
measure; measurement includes Sensor Offset value. This value
may not represent reciprocal of Level if the liquid level is
within the Blocking Distance or Level Offset where the Level
value is clamped.
6
Echo Strength xx
xxx.x units
Transmitter Display
Transmitter display showing Level and Echo Strength of signal
reflection. Good values are 20-99.
7
% Output
xx.x%
Transmitter Display
Transmitter displays % Output measurement derived from
20 mA span.
8
Loop Current
xx.xx mA
Transmitter Display
Transmitter displays Loop Current value (mA).
9
Local Tag
xxxxxxxxxxxx
Transmitter Display
Transmitter displays Local Tag information.
10
Totalizer
(Resettable)
Transmitter Display
Transmitter displays current value of the Resettable Totalizer.
11
Totalizer
(Non-Resettable)
Transmitter Display
Transmitter displays current value of the Non-Resettable
Totalizer.
12
Measure Type
(select)
Select Type of Measurement
Select
Level Only
or
Flow & Level
,
Volume & Level
,
Flow
,
Flow Units
,
Volume
,
Volume Units
,
Loop Control
, and
Strapping Table
screens appear when necessary. Note that
the Flow or Volume screens are selected for rotation when
Measure Type is set to
Flow & Level
or
Volume & Level
and is
deselected when Measure Type is set to Level Only.
See Section 2.6.6.1 for the complete Level menu or 2.6.6.2 for
the complete Volume and Level menu.
13
Level Units
(select)
Select Units of measure
Select cm (xxxx), meters (xx.xx), inches (xxx.x), or feet (xx.xx).
Allowable decimal position is controlled; four characters is
maximum reading. Decimal position is controlled by Units
and Tank Height.
14
Range
Enter the Range value
Range is measured from the bottom of the antenna threads to
the bottom of the flow element.
