Magnetrol Pulsar R86 Installation & Maintenance Instructions Manual Download | Manualshive

Page: 61 / 61

background image

BULLETIN:  58-641.1
EFFECTIVE:  July 2019
SUPERCEDES:  July 2017

Service Policy

Owners  of  MAGNETROL may  request  the  return  of  a
control or any part of a control for complete rebuilding or
replacement. They  will  be  rebuilt  or  replaced  promptly.
Controls  returned  under  our  service  policy  must  be
returned by Prepaid transportation. Magnetrol will repair
or  replace  the  control  at  no  cost  to  the  purchaser  (or
owner) other than transportation if:

1. Returned within the warranty period; and
2. The factory inspection finds the cause of the claim to

be covered under the warranty.

If the trouble is the result of conditions beyond our con-
trol; or, is NOT covered by the warranty, there will be
charges for labor and the parts required to rebuild or
replace the equipment.

In  some  cases  it  may  be  expedient  to  ship  replacement
parts;  or,  in  extreme  cases  a  complete  new  control,  to
replace the original equipment before it is returned. If this
is desired, notify the factory of both the model and serial
numbers of the control to be replaced. In such cases, cred-
it  for  the  materials  returned  will  be  determined  on  the
basis of the applicability of our warranty.

No claims for misapplication, labor, direct or consequen-
tial damage will be allowed.

Return Material Procedure

So that we may efficiently process any materials that are
returned,  it  is  essential  that  a  “Return  Material
Authorization”  (RMA)  number  be  obtained  from  the
factory  prior  to  the  material’s  return.  This  is  available
through  Magnetrol  local  representative  or  by  contacting
the factory. Please supply the following information:

1.  Company Name
2.  Description of Material
3.  Serial Number
4.  Reason for Return
5.  Application

Any unit that was used in a process must be properly
cleaned in accordance with OSHA standards, before it is
returned to the factory.

A Material Safety Data Sheet (MSDS) must accompany
material that was used in any media.

All shipments returned to the factory must be by prepaid
transportation.

All replacements will be shipped F.O.B. factory.

ASSURED QUALITY & SERVICE COST LESS

PULSAR Pulse Burst Radar transmitters may be protected by one or more of the following U.S. Patent Nos.:
US 6,062,095; US 6,980,174; US 7,102,584; US 7,106,248; US 7,271,646

F

OUNDATION

fieldbus logo is a registered trademark of the Fieldbus Foundation

705 Enterprise Street • Aurora, Illinois 60504-8149 • 630.969.4000
[email protected] • magnetrol.com

Copyright © 2019 Magnetrol International, Incorporated

«
...
59
60
61

Summary of Contents for Pulsar R86






























































Reviews:

No comments

Related manuals for Pulsar R86

Brand: Bushnell Pages: 9

Brand: Xoro Pages: 32

Brand: Philco Pages: 7

Brand: Caliber Pages: 14

Brand: Karma Pages: 2

Brand: SenHaiX Pages: 7

Brand: LENCO Pages: 3

Brand: Digi Pages: 67

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 3

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 6

Brand: Philips Pages: 7

Brand: Philips Pages: 8

Original radio TAVS700/98

Brand: Philips Pages: 13

Brand: Philips Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands