Appendix B: Accessories
● Neck Extensions
CONTOUR Operating Instructions © 2013 Magnetrol International all rights reserved
33
Neck Extensions
The purpose of using the neck extensions is to lower the
scanner body below obstructions, such as standpipes, support
beams or other construction which might block the acoustic
signals.
Neck extensions are available in 2 sizes:
30cm (11.81")
50cm (19.68")
The neck extension must be purchased with a compatible
scanner. An adjusted antennas cable length is manufactured with the scanner and is
compatible with the required neck extension.
NOTE
: When using the neck extension, the measurements are referenced to the
top part of the scanner body.
