HEADLIGHT TEST
TEST OF THE HIGH BEAM HEADLIGHT
Now the device prepares to test the right high beam
headlight.
Switch on the RIGHT HIGH BEAM headlight of the vehicle
to be tested, and press.
Wait a few seconds and check for the appearance of the
maximum intensity point of the high beam.
The position of the line at the center of the tolerance limits
with change of the color from red to green is the sign that
the headlight is correctly CENTERED.
Headlight centered
Press
key to proceed to control of the headlight in
Real mode.
NOTE: This screen displays the image of the luminous
beam projected on the internal screen to the optical box
and you can check the position in REAL mode.
Press
to proceed to control of the next headlight.
Headlight not centered
Proceed now to the left side of the vehicle and repeat the
test sequence.
CAUTION!
When using the headlight tester in a
mobile station (on rubberized wheels),
after positioning on the left headlight
check the alignment again through the
visor.
OFFICIAL TEST: At the end of the procedure the device will
send the data to the PC via communication protocol RS232.
FREE TEST: On models with the printer incorporated, the
test results are printed when you press PRINT.
