background image

 

 

 

 

The following rules must be followed carefully to prevent damage to the operator and 
device. 

 

 

Read the device labels, do not cover them for any reason, and replace them immediately if they 
should be damaged. 

 

The device should only be used by authorized personnel, trained in its use. 

 

Do not use the device in an explosive atmosphere. 

 

The working environment should be dry and sufficiently ventilated. 

 

When moving the device, pay attention to other people, especially children, in the vicinity. 

 

Do not bump shelves or scaffoldings where there may be a danger of falling objects: you and 
the device could be damaged. 

 

The storage temperature should be between -

5° and +55°C. 

 

The working temperature should be between 

+5° and +45°C. 

 

Provide  an  adequate  exhaust  system  for  the  exhaust  gas,  since  the  headlight  test  must  be 
performed  with  the  engine  of  the  motor  vehicle  running.  Accidental  inhalation  of  carbon 
monoxide  can  cause  serious  damage  to  the  organism,  with  a  fatal  outcome  in  some  cases. 
Contact our agent in your zone, who can indicate the most suitable system for your company. 

 

Do not leave the headlight tester in the sun or in the immediate vicinity of hot objects like 
heaters, radiators, etc. 

 

Do not leave the headlight tester out in the rain or in an excessively damp place as its electronic 
circuits could be damaged. 

 

If the headlight tester will not be used for a long period, we recommend that you cover it with its 
dust cover (optional). 

 

There is a battery in the headlight tester that could cause a fire or explosion hazard if handled 
improperly.  To  prevent  this  risk  to  not  heat  or  use  open  flames  near  the  battery  and,  when 
replacing it, use one with the same characteristics. 

 

When you encounter any malfunction in use of the device, contact the retailer or send the 
device to the nearest service center. 

 

The headlight tester has to be serviced only by a authorized and trained factory technicians. 

 

In case of parts replacements, order ORIGINAL replacement parts from a concessionaire or 
authorized retailer. 

 

Tampering with any part of the device will invalidate the warranty. 

GENERAL SAFETY RULES 

Summary of Contents for 007935902020


















Reviews: