IMPULSE®•G+/VG+ Series 4 24 V Power Supply Installation Manual - November 2011
1-14
Option Installation Methods
There are three different installation methods for the option based on drive model. Find the drive
model number on the drive nameplate and refer to Table 3 to determine the proper option installation
method for your drive.
Table 3: Model-Specific Installation Methods
Installation Method A
Drive Model (-G/VG+S4)
Installation Method
Page
2003 to 2075, 4001 to 4039, 5001 to 5027
A
1-14
2085 to 2415, 4045 to 4370, 5032 to 5200
B
1-18
4450 to 4605
C
1-22
D A N G E R
Electric Shock Hazard
Disconnect all power to the drive and wait at least the amount of time specified on the drive
front cover safety label. After all indicators are off, measure the DC bus voltage to confirm safe
level, and check for unsafe voltages before servicing. The internal capacitor remains charged
after the power supply is turned off.
N O T I C E
Damage to Equipment
Observe proper electrostatic discharge procedures (ESD) when handling the option, drive,
and circuit boards. Failure to comply may result in ESD damage to circuitry.
