IMPULSE®•G+/VG+ Series 4 24 V Power Supply Installation Manual - November 2011
1-7
3. Receiving
Please perform the following tasks upon receiving the option:
•
Inspect the option for damage. Contact the shipper immediately if the option appears damaged
upon receipt.
•
Verify receipt of the correct model by checking the model number printed on the option
nameplate (refer to Figure 3 on page 1-8 for more information).
•
Contact your supplier if you have received the wrong model or the option does not function
properly.
Option Package Contents
<1> The warning label packaged with the option must be affixed to the option to maintain UL listing. Refer to Option Label Warnings on page 1-
5 for instructions on label placement.
Tools Required for Installation
•
A Phillips screwdriver (M3 metric / #1, #2 U.S. standard size) is required to install the option.
•
A straight-edge screwdriver (blade depth: 0.015” [0.4 mm], width: 0.098” [2.5 mm]) is required to
wire the option terminal block.
NOTE:
Tools required to prepare option cables for wiring are not listed in this manual.
Description:
Option Unit
Warning Label
<1>
Screws (M3)
Installation
Manual
--
Quantity
1
1
3
1
