IMPULSE®•G+/VG+ Series 4 24 V Power Supply Installation Manual - November 2011
1-12
Prior to Installing the Option
Prior to installing the option, wire the drive, make the necessary connections to the drive terminals,
and verify that the drive functions normally. Refer to the IMPULSE®•G+ & VG+ Series 4 Instruction
Manual packaged with the drive for information on wiring and connecting the drive.
Single Drive Installation
Figure 4 shows the installation distance required to maintain sufficient space for airflow and wiring.
Figure 4: Correct Installation Spacing
NOTE:
IP20/NEMA Type 1 Enclosure and IP00/Open-Chassis models require the same amount
of space above and below the drive for installation.
Dimensions
The option is 163 mm (6.4 in.) tall and adds 50 mm (2.0 in.) to the width of the drive when installed.
Figure 5: Dimensions
