IMPULSE®•G+/VG+ Series 4 24 V Power Supply Installation Manual - November 2011
1-16
3.
Firmly plug the end of the connection cable into the CN19 connection port on the drive.
Figure 8: Plug the Connection Cable into the Drive
4.
Align the connector tabs on the option with the insertion tabs on the drive as shown in Figure 9.
Figure 9: Align the Option and the Drive
NOTE:
Take proper precautions when connecting the option so the option will easily fit onto the
drive. Make sure the connector cable is not pinched between the option and the drive.
N O T I C E
Make sure the connector is facing in the proper direction when plugging it into the drive. An
improper connection can damage the connector and the drive.
