![background image](http://html1.mh-extra.com/html/magnetek/intelesmart2/intelesmart2_manual_3587813030.webp)
in
tele
Smart2 Instruction Manual
June 2016
Page 30 of 49
This screen also allows the programmer to create a specific name for the device to help keep track of
device settings and changes. It is recommended that a unique name is chosen for each device
programmed with RCP.
7.4.1 inteleSmart2 Configuration Page
The in
tele
Smart2 has a configurable page available to change settings on. This allows the configuration
of general receiver settings (Receiver name, Access code, RF channel, etc.), displays the current setup of
the in
tele
Smart2, and the configuration of the CAN-bus network settings.
Unit Info Page
The left section of the Unit Info page allows the user to view the receiver Project ID and serial number.
The user can modify the receiver name, access code, and RF channel. This page also allows the user to
select between internal or external RF antennas. This page may also be used by the user to
synchronize the internal clock on the receiver with the connected PC or manually set the clock/date.
NOTE: Changing any of these details will require a reboot of the inteleSmart2 after the new information
has been sent to the device
.