Magnetek Impulse-t 2006-T, Instruction Manual

Page: 66 / 82

IMPULSE•T Instruction Manual – October 2015
5-22
Operator Parameters
The keypad parameters give the ability to show a variety of information such as frequency reference,
motor current, input and output terminal status, along with fault trace information. Information
displayed can be customized to meet your crane and hoist application. Below is a list of parameters
covered in this section.
• O2 Drive Selection
• U1 Monitor Parameters
• U2 Fault Trace
• U4 Maintenance
Drive Selection
Table 5-25:Drive Selection Parameter Settings
Parameter
Code
Name Function Range
Initial
Value Access
Level
O2-04 kVA Selection Determines the model number of
the drive, which is based on the
kVA rating. The following in this
column are Magnetek model
numbers.
60–97 * Adv
60 --
Not used
61 --
Not used
62 2A0004
2004-T
63 2A0006
2006-T
64 --
Not used
65 2A0010
2010-T
66 2A0012
2012-T
67 --
Not used
68 --
Not used
91 4A0001
4001-T
92 4A0002
4002-T
93 4A0004
4004-T
94 4A0005
4005-T
95 --
Not used
96 4A0009
4009-T
97 --
Not used
*Initial value determined by drive model.