Magnetek Impulse-t 2006-T, Instruction Manual

Page: 39 / 82

IMPULSE•T Instruction Manual – October 2015
4-7
Parameters
Parameters are organized by function group, which will determine how the drive functions. These
parameters are programmed in the drive’s software as measurable values or options—both of which
will be referred to in this manual as
settings
. While some of these parameters are associated with
one setting, others are tied to a number of possible settings.
NOTE: The terms “constant” and “parameter” have the same meaning.
By default, the IMPULSE•T is configured for a common crane system. If you find it necessary to
change the initial settings, it is recommended that you only allow qualified crane system technicians
to program the drive. This can be accomplished by using the Access Level feature. For more
information on the security feature, see Table 4-4.