10
GB
SPECIFICATIONS
Frequency response:
20 Hz – 20 kHz (+/- 0.5 dB)
Signal to noise ratio :
108 dB (20 Hz – 20 kHz, A-weighted)
Channel separation:
> 90 dB (1 kHz)
Output voltage:
1.8 V (10 kOhm)
Harmonic distortion:
< 0.002%
Mains voltage:
230 VAC / 50 Hz
Electricity consumption:
Max.
30 W
Standby
<1.0 W
Playable formats:
CD-Audio, CD-R, CD-RW
Dimensions (wxhxd):
Main device:
430 x 76 x 287 mm
Main device incl. operational
elements/connecting terminals:
430 x 76 x 295 mm
Remote Control:
54 x 140 x 11 mm
Weight:
4.2 kg
Subject to technical change.
For further information please visit our website: http://www.magnat.de.
OPERATIONAL ELEMENTS AND CONNECTIONS – REAR
1 POWER SWITCH
Switches the device on and sets it in the standby mode. If the switch is set to the "OFF"
position, the device is disconnected from the mains supply.
2 MAINS CONNECTION
For connecting the supplied mains cable.
3/4 DIGITAL AUDIO OUTPUTS
For the connection of external devices (e.g. Minidisc recorder) via a coaxial (3) or optical
(4) digital output.
5 ANALOGUE AUDIO OUTPUTS
RCA output jacks for connection to a hi-fi audio amplifier.
INITIAL OPERATION
• Place the MCD 450 on an even surface. Observe the relevant clearance gaps as
specified under "Important safety instructions".
• Connect an audio output (analogue or digital) to a suitable amplifier. Also refer to the
operating instructions for the device when doing this.
• Connect the supplied mains cable to the rear and then insert the other end into a 230V
socket.
• Actuate the on/off switch on the rear side, the device is now in the standby mode.
• Switch on the device using the remote control or with the ON/STBY key on the front.
SERVICE AND TECHNICAL PROBLEMS
If you should encounter any technical problems, please contact your specialist dealer or
Magnat Audio-Produkte GmbH, Tel.: 02234807-0.
