background image

1

Safety Precautions

The lightning flash with an arrowhead symbol within an equilateral triangle is 

intended to alert the user to the presence of uninsulated "dangerous voltage" 

within the product's enclosure that may be of sufficient magnitude to constitute 

a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user 

to the presence of important operating and maintenance (servicing) instructions 

in the literature accompanying the appliance.

WARNING:  

TO REDUCE THE RISK OF FIRE OR ELECTRIC, DO NOT EXPOSE THIS APPARATUS TO RAIN

OR MOISTURE.

THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO 

OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

 

DO NOT OPEN THE CABINET, DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE  

 

ENCLOSURE. ONLY QUALIFIED SERVICE PERSONNEL SHOULD ATTEMPT THIS.

CAUTION: 

TO  PREVENT  ELECTRIC  SHOCK,  MATCH  WIDE  BLADE  OF  PLUG  TO  WIDE  SLOT, AND  

 

FULLY INSERT.

CAUTION: 

  

This player employs  a Laser System.  To prevent direct exposure to the laser beam, do not try to open the enclosure. 

                                                Visible laser radiation when open and interlocks defeated.
 

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

 

DO NOT STARE INTO BEAM.

 

To ensure proper use of this product, please read this operating instructions carefully and retain for future  reference.  Should the unit  require 

 

maintenance, contact an authorized service location, or contact local dealer. Only qualified service personnel should remove the cover.

IC NOTICE: 

 

Since DVD circuitry may cause interference to other radio or television tuners nearby, switch this unit off when not in use or move it away 

from the affected tuner. 

NOTE:  This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio 

Interference Regulations of Industry Canada.  These limits are designed to provide reasonable protection against harmful interference in a 

residential installation.  This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance 

with the instruction, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not 

occur in a particular installation.  If this equipment does cause harmful interference to radio or television operation (which can be determined 

by turning the equipment off), the user is encouraged to try to correct the interference by one or more of the following measures:

  ·  Reorient or relocate the receiving antenna.

  ·  Increase the separation between the equipment and receiver.

  ·  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio / TV technician for help. 

This Class B digital apparatus complies with Canadian ICES-003.

WARNING: 

 

Changes or modifications made to this equipment, not expressly approved by manufacturer or parties authorized by manufacturer 

                                             will void all the manufacture warranties.

                                    THE REGION CODE FOR THE UNIT IS 1.

Since it is very usual for DVD movies to be released at different times in different regions of the world, all players have region 

codes and discs can have an optional region code.  If you load a disc of a different region code to your player, you will see the 
region code

 

notice on the screen.  The disc will not play, and should be unloaded.

For Customer Use:

In spaces provided below, record the Model and Serial No. located on the rear panel of your player.

Model No.                                                                      Serial No.

Retain this information for future reference.

CLASS 1

LASER PRODUCT

!

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS

RISQUE DE CHOC ELECTRIQUE NE

PAS OUVRIR

CAUTION: TO REDUCE THE RISK OF ELECTRIC 

SHOCK, DO NOT REMOVE COVER (OR BACK).  

NO USER-SERVICEABLE PARTS INSIDE.  REFER 

SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION: (VISIBLE) LASER RADIATION WHEN OPEN.

DO NOT STARE INTO BEAM.

!

Summary of Contents for DVD833-2






























Reviews: