Remote Control Touch / blue PiraT Re-
mote
User Guide
Datum:14.12.2018
Seite 73 von 82
RCTouch_UserGuide_V3.4.1.doc
10 Data sheet blue PiraT Remote
General data
Nominal power supply voltage
13.8 V
Power supply voltage
7 V to 28 V for system startup
5 V to 29 V operating voltage
Dev/-8%
Reverse polarity protection of the supply voltage
Yes
Resistance to short-circuiting
Yes
Power consumption / operating (typ.)
400 mA (@ 13.8 V)
Power consumption / operating (peak.)
< 2000 mA (@ 13.8 V)
Power consumption / standby
< 1 mA
Operating temperature
- 20 °C to + 60 °C
Storage temperature
- 20 °C to + 85 °C
Weight (ca.)
415 g
Power Management
Startup time
from standby to full operation
< 35 s
Start of logging -
starting from standby
CAN, LIN, Serial, Analog, Digital
< 200 ms
Standby Mode
Configurable time without bus load
Wake
HS-CAN, LS-CAN, LIN, Serial, KL 15,
[ON / Trigger] button
Data loss by power loss
If the device is switched off due to sudden power loss, up to
60 sec. of data may be lost.
Case
Size (ca.)
5.91" x 3.62" x 0.98"
(150 x 92 x 25 mm)
Operating controls
Push-button to start and shut down data logger and to set
markers
LEDs (STATE, ACTIVE)
STATE, ACTIVE
Connectors
side connectors
2x Gbit Ethernet
SUB-D 26-pol:
Power supply, 2x HS-CAN, 1x LS-CAN, 1x LIN, 2x Serial, 2x
Analog In, 2x Digital In
Rear connectors
4-pol audio jack plug stereo out/microphone (3.5 mm) OMTP
Micro USB 2.0
SD card
Screen
Size
5"
Resolution
800 x 480
Colors
16.7 million
Luminance
700 cd/m²
Touch function
Resistive, multi-touch
