Remote Control Touch / blue PiraT Re-
mote
User Guide
Datum:14.12.2018
Seite 15 von 82
RCTouch_UserGuide_V3.4.1.doc
5.2.4 Speaker
The speaker is used to play voice notes. Its volume is adjustable.
5.2.5 LEDs
Activity and operating state of the
Remote Control Touch
and
blue PiraT Remote
are indicat-
ed by the LEDs.
Table 5.2: LED behavior
5.2.6 Microphone
The microphone is used to record voice notes on triggers. The quality of the voice recording
depends on the ambient environment .
5.2.7 Touchscreen
The screen is used to operate the devices. Only use the tip of the finger to operate it. The
brightness is adjustable.
Activity
/ operating state
Behavior
Active LED
State LED
device goes to standby
green pulsing
not lighted
in error mode
green light
red light
in operation
green light
not lighted
powered off
not lighted
not lighted
press Home button
brief light-up
not lighted
record voice note
brief light-up
red pulsing, as long as recording
set trigger
brief light-up
not lighted
switch off device
green pulsing
not lighted
switch on device
green flashing
not lighted
update firmware
green light
red light
wake up device
brief light-up
brief light-up
external medium detected
(only blue PiraT Remote)
green light
red flashing
External medium full
green light
red pulsing