Remote Control Touch / blue PiraT Re-
mote
User Guide
Datum:14.12.2018
Seite 60 von 82
RCTouch_UserGuide_V3.4.1.doc
7.4 Changing application
To reach another application, you have two options:
1.
Press the Home button …
Active LED lights up briefly.
<Home> view appears.
1. Open the side menu (see section 7.9
and tap on the icon of the desired application.
7.5 Actuating functionkey
Navigate to the tab sheet
[Functionkeys]
in the application Driver View
.
Tap on the desired function
key that was previously assigned with a “complex trigger”, see sec-
tion
Fehler! Verweisquelle konnte nicht gefunden werden.
.
The device responds according to the <Action> that was set in the configuration for
the <Event>
[Key Stroke]
using a functionkey as <Key>.
7.6 Adjusting backlight
Navigate to the tab sheet
[General]
in the application Settings
.
7.6.1 Automatic adjustment
If you want the brightness of the screen to adjust automatically, tap on the gray
[OFF]
button
under <Auto Brightness>.
Brightness is automatically adjusted.
The blue
[ON]
button is active.
Brightness scale with brightness slider is inactive.
7.6.2 Manual adjustment
If you want to adjust the brightness of the screen manually, tap on the blue
[ON]
button under
<Auto Brightness>.
The gray
[OFF]
button is active.
Brightness scale with brightness slider is active.
Swipe the brightness slider to the desired position or
tap on the desired position on the brightness scale.
Brightness is set according to adjustment.
A brief fade-in indicates the new brightness value set in percent.
Figure 7.1: Fade-in after adjusting the brightness
