Remote Control Touch / blue PiraT Re-
mote
User Guide
Datum:14.12.2018
Seite 21 von 82
RCTouch_UserGuide_V3.4.1.doc
5.4.1.3
In the network
The
Remote Control Touch / blue PiraT Remote
has two Ethernet ports. The loggers to be
controlled are connected directly via Ethernet. These loggers must establish a TSL network with
the Remote Control Touch / blue PiraT Remote in order to be recognized. The client computer
can be connected to a free Ethernet port of the TSL chain.
Figure 5.6: TSL network with one bPMini, one RCT and one bP2 (e.g.)
5.4.2 Telemotive System Client
Note: When delivered, the Remote Control Touch / blue PiraT Remote is configured as
Automatic DHCP configuration for TSL
with
IP
192.168.0.233.
Open your internet browser.
Enter the IP address of the Remote Control Touch / blue PiraT Remote in the address bar. (IP
factory setting:
192.168.0.233
)
Press the
[Enter]
key.
The computer connects to the device.
The TSL Client Portal opens.
