Remote Control Touch / blue PiraT Re-
mote
User Guide
Datum:14.12.2018
Seite 10 von 82
RCTouch_UserGuide_V3.4.1.doc
4.2 Additional features by optional licenses
Additional features can be activated by purchasing and installing licenses. Licenses can be or-
dered at our sales team. You find the user guides for these additional features in the Service-
Center. Currently the following licensed features are available.
Feature
Description
Camera Link
video recording via video server or network cameras
WLAN
supporting wireless LAN
(802.11, 802.11a, 802.11n), (802.11ac from FW 02.04.01)
GPS logging
tracking of GPS data
(in the moment blue PiraT2 Ver. 1.x only)
Measurements with CCP
CAN Calibration Protocol
Measurements with XCP
Universal Measurement and Calibration Protocol
Currently the functionality for Ethernet (XCP on Ethernet) and the CAN-bus
(XCP on CAN) are available.
MOST150 Streaming
logging MOST150 synchronous/isochronous data
MLBevo
The license
Connected-Gateway MLBevo
enables the recording of data of
the ATOP control unit MLBevo via USB to the Telemotive data logger and
convert these data with the Telemotive System Client.
(from FW 02.03.01)
Telemotive Download
Terminal
Telemotive Download Terminal allows an automatization of configured
tasks for a defined group of devices.
(from FW 02.03.01)
TPE
TPE =
Telemotive Performance Extension
Increasing the logging rate for Ethernet data up to 100Mbit/s
(from FW 02.04.01)
Test automatisation
Interface for connecting to test automation tools.
At the moment, the sending of CAN messages is supported.
(from FW 02.04.01)
Cellular network
Allows the logger to send status messages over cellular network.
(from FW 03.01.01)
Table 4.1: Additional features by optional licenses
