11
www.magmaweld.com
USER MANUAL | MANUEL D’UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
RS 350 M - MW / RS 400 M - MW / RS 500 M - MW
EN
TECHNICAL INFORMATION
1.1 General Information
1.2 Machine Components
Technical Information
RS 350 M, RS 400 M, RS 500 M, RS 350 MW, RS 400 MW and RS 500 MW are 3 phase step controlled, constant
Voltage industrial MIG/MAG machines to weld all types of solid and flux cored wires in any kind of fabrication and
erection. The welding voltage adjustment ranges are, for 350 model 21 steps between 20-51 V, for 400 models
28 steps between 16-34 V, for 500 models 30 steps between 16-39 V. Wire feeding unit is a robust 4 wheel drive
system which is designed as a separate box from the power source in order to cover larger work areas. It contains
a wire feeding motor-gearbox assembly, an electronic controlcard and a gas valve, therefore this unit should be
handled carefully at site. The wheels under the box are for the ease of the welder to move the box as he welds,
but the box shouldn’t be pulled across the work area by the torch. Even though you can manufacture with these
machines in a big range of current scale all day long, model 350 is optimized for 1.0 mm, 400 for 1.2 mm, 500 for
1.2-1.6 mm heavy-duty applications.
Figure 1 : RS 500 M Front and Back View
1-
Torch Connector
2-
On / Off and Coarse Adjustment Switch
3-
Thin Adjustment Switch
4-
Gas Outlet
5-
Wire Feed Unit Connector
6-
Welding Current Plug Socket
7-
Trigger Mode Switch
8-
Wire Speed Adjustment Button
9-
Turn Table
10-
Handle
11-
Voltmeter
12-
Ammeter
13-
Workpiece Cable Socket (-)
14-
Wheel
15-
Wire Feeder Harness
15-a
Welding Current Plug
15-b
Wire Feed Unit Control Cable
15-c
Gas Hose
16-
Mains Cable
17-
Drum Feeding Wire Inlet
18-
Insurance Group
19-
CO
2
Heater Socket
20-
Gas Inlet
21-
Fan Output
22-
Gas Cylinder Transport Platform
1
7
8
9
10
11
12
13
14
2
3
4
5
6
15
16
17
18
19
20
21
22
15-a
15-b
15-c
